Philips PM2519 - 5.2. DISMANTLING THE BATTERY POWER SUPPLY (PM 2519;21)

5.2.
DISMANTLING THE BATTERY POWER SUPPLY {PM 2519/21)
— Remove the top cover as described.
— Disconnect the connector from X1600.
~- Remove the two screws from the battery power supply cover (Fig. 5.5. item 1).
— Lever up the cover and remove it.
Remove the two screws (Fig. 5.5. item 2).
— The battery and the printed-circuit board can now be removed.
$14477.
Fig. 5.5. Dismantling the battery power supply