Philips Q Line 43BDL3550Q - Input;Output Terminals Description

43BDL3550Q_50BDL3550Q_55BDL3550Q
5
2.2. Input/Output Terminals
3
4
5 6 87 9
HDMI1 IN
HDMI2 IN
AUDIO OUT
DVI(DVI-D) IN
RJ45
PC LINE IN
VGA IN
10
12
14
16
11
13
15
USB2.0
TF
RS232
OUT
RS232
IN
IR-IN
IR-OUT
1
2
USB
Service Port
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power between On and O.
3
RJ-45 IN
LAN control function for the use of remote control signal
from control center.
4
PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
5
DVI IN
DVI-D video input.
6
VGA IN
VGA video input.
7
AUDIO OUT
Audio output to external AV device.
8
HDMI1 IN /
9
HDMI2 IN
HDMI video/audio input.
10
IR IN /
11
IR OUT
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working
if the jack [IR IN] is connected.
• To remotely control your A/V device via this display,
refer to page 14 for IR Pass Through connection.
12
MICRO SD CARD
Connect your MICRO SD CARD.
13
USB SERVICE PORT
Connect to USB storage for Android ADB Firmware
update.
NOTE: It’s for updating rmware only.
14
USB 2.0 PORT
Connect your USB storage device and service port.
15
RS232 IN /
16
RS232 OUT
RS232 network input / output for the loop-through
function.