Philips Q Line 65BDL3511Q - Page 33

65BDL3511Q/75BDL3511Q/86BDL3511Q
31
If the selected input has signal, set the system to display the
image automatically according to the search order of each
option.
The options are: {Auto} / {Failover}
• {Auto}: VGA->DVI->HDMI1->HDMI2->HDMI3->USB->OPS
NOTE: OPS only for 75BDL3511Q, 86BDL3511Q.
• {Failover}
- Failover 1: User-dened setting. Default:HDMI 1.
- Failover 2: User-dened setting. Default:HDMI 1.
- Failover 3: User-dened setting. Default:HDMI 1.
- Failover 4: User-dened setting. Default:HDMI 1.
- Failover 5: User-dened setting. Default:HDMI 1.
- Failover 6: User-dened setting. Default:HDMI 1.
- Failover 7: User-dened setting. Default:HDMI 1.
NOTE: Failover7 only for 75BDL3511Q, 86BDL3511Q
Date and time
Set the current date and time for the display’s internal clock.
NOTES:
The denition and behavior of the Daylight saving time:
The current implementation of daylight saving is a reminder
tool for the user who doesn’t know how to adjust the clock of
daylight saving.
It does not adjust the real time clock automatically. The
problem is that there are no standard rules on when to adjust
the clock dened by region or country. To solve this problem,
the user must be able to set the daylight saving start/end
date. When daylight saving correction is on (user selectable)
then the real time clock should be adjusted at the time set of
the daylight saving on/o date. At the start date of daylight
saving, the clock should be adjusted 1 hour forward at 2 o’clock.
At the end date of daylight saving, the clock should be adjusted
1 hour backward at 2 o’clock.
The existing daylight on/o menu should be replaced by the
following menu structure:
The menu item {Daylight saving} opens the submenu that
contains the following items:
• Menu item {Daylight saving start date} Selection item {1st,
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
• Menu item {Daylight saving stop date} Selection item {1st,
2nd, 3rd, 4th, last} Sunday of selection item {1-12 month}
• Menu item {Correction time} Selection item {0.5, 1.0, 1.5,
2.0} hour
• Menu item {Daylight saving} Selection item {on, o}
When “daylight saving” is “on”, the real time clock will be
adjusted automatically at the daylight saving time (e.g. April 5,
2015, 02.00 o’clock: time will be set 1 hour later or October 25,
2015, 02.00 o’clock: time will be set 1 hour earlier).
Schedule
This function allows you to program up to 7 (seven) dierent
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn On and O.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: It is recommended that you set up the current date
and time in the {Date and time} menu before using
this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
Schedule
2. Press [ ] or [ ] button to select a schedule item (item
number 1 - 7), and press [OK] or [ ] button to enter the
submenu.
Schedule 1
Schedule 2
Schedule 3
Schedule 4
Schedule 5
Schedule 6
Schedule 7
Schedule
Status
Source
On Time
Off Time
Repeat modes
USB Play List
On
HDMI1
-- : --
-- : --
None
• {Status} - Press [ ] or [ ] button to select the status On or
O.
• {Source} - Press [ ] or [ ] button to select the input source.
• {On Time} - Press [ ] or [ ] button to adjust and the display
will turn on at the specied time.
• {O Time} - Press [ ] or [ ] button to adjust and the
display will turn o at the specied time.
Leave hour and minute options empty if you do not want to
use the function of power-on or power-o schedule.
• {Repeat modes} -Press [ ] button to select which day in a
week this schedule item will take eect, and then press the
[OK] button.
• {USB Play List} - Press [ ] or [ ] button to select playlist
index for USB source.
None: no playlist, autoplay function depends on {OPTION}
-> {USB Autoplay}.
1~7: playlist number.
USB Autoplay: autoplay function.
NOTE:
The scheduler cannot work cross midnight in one schedule
with no repeats or only one schedule day is selected.
3.
For additional schedule settings, press [ ], then repeat the
steps above. A check mark in the box next to the number of
the schedule item indicates that the selected schedule is in
eect.
NOTES:
• If the schedules overlap, the scheduled power-on time takes
priority over scheduled power-o time.