65BDL3511Q/75BDL3511Q/86BDL3511Q
33
USB Cloning
Copy PD settings from one set to another.
Import: Import settings from another set.
Export: Export settings to another set.
OPS Setting
Set the OPS conguration under each power condition.
• {Auto} - After selecting {Card OPS} for video source
input, the OPS will be set to o when the display power
is set to o, or set to on when the display power is set to
on. When set to other video source inputs, the OPS will
always be set to on.
• {Always o} - The OPS will always be set to o.
• {Always on} - The OPS will always be set to on.
NOTE:
1. OPS only for 75BDL3511Q, 86BDL3511Q
2. After connected to your OPS device, this option is
functional.
Firmware update
Update rmware via USB disk.
Factory Reset
Reset all your customized settings to the factory default
values.
Option Reset
Reset all settings in the Option menu to factory preset values.
To Next Page
Loading...
