Troubleshooting
1. Fitting the belt
Adjustment tips:
- Adjustment to the belt must be done whilst you are sat upright
- To adjust, move the slide lock away from the buckle to tighten; move slide lock closer to loosen
- There should be no slack in the three layers of belt between the clasp and slide lock
Eort Belt Connection Eort Belt Adjustment
2. Smart guide patient setup
During setup, illuminated sensor indicators will walk you through sensor placement
The smart guide gives you feedback that:
- Each sensor is connected properly
- The signal quality is good
- The device is functioning properly
To Next Page
Loading...
