4
Putting on the Mask
1. With the mask assembled (see Assembly section), place the cushion under the
nose and insert the pillows cushion tips into your nostrils. b
2. Position the frame on the top of the head. c
Tip: For proper sizing, see Cushion Sizing and Mask Frame Sizing sections.
3. Pull the headgear over the back of the head. d
2
3
4
Adjusting the Mask
1. Peel the headgear tabs away from the fabric. Adjust the straps length. Press the
tabs back against the fabric to reattach. e
Note: Do not overtighten the headgear. Signs of overtightening include redness,
sores, or bulging skin around the edges of the mask.
2. Position the mask until it ts comfortably. f
3. When nished the elbow should rest at the top of the head. g
5 6
7
To Next Page
Loading...
