Philips RESPIRONICS DreamWear Series - Disassembly; Health Care Provider & Clinician Information; Useful Life; Multi-Patient Use

8
Disassembly
1. Headgear: Undo the headgear tabs and pull through the slots in the mask frame.
2. Fabric sleeves: Undo the strips and remove from the mask frame.
3. Tubing quick release: Pull the tubing quick release from the elbow.
4. Elbow: Pull the elbow from the top of the frame.
5. Cushion: Pull the cushion from the mask frame.
7 Health Care Provider & Clinician Information
Useful Life
The useful life of the DreamWear Gel Pillows mask depends on the use conditions
and maintenance (cleaning, institutional disinfection, and component replacement)
of the device. Inspect the mask parts regularly for damage or wear. Replace
components as deemed necessary.
Multi-Patient Use
Refer to the Disinfection Guide for Professional Users to reprocess between
patients in a clinical setting. Access the latest version of the Disinfection Guide at
www.healthcare.philips.com or by contacting customer service at 1-800-345-6443
(USA or Canada only) or +1-724-387-4000.
Specifications
The technical specications of the mask are provided for your healthcare
professional to determine if it is compatible with your CPAP or bi-level therapy
device.
Warning: Use outside of these specications may result in ineective therapy
The pressure ow curve shown below is an approximation of expected performance.
Exact measurements may vary.