Philips RQ1250 - How to Use the Philips Shaver; Dry Shaving Technique

3 Put the shaver in the charger and push it
backwards (‘click’).
The display shows that the shaver is charging
(see chapter ‘The display’).
Charging in the Jet Clean System (specic
types only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Place the shaver upside down in the holder
with the display pointing towards the front of
the Jet Clean System.
Note: The shaver cannot be placed in the Jet Clean
System when the protection cap is on the shaving unit.
Note: RQ1290 only: when you turn the shaver upside
down, the minutes indication on the display is also
turned upside down so you can still see to what level
the battery is charged.
4 Press the shaver tightly into the holder to lock
it into place.
The display shows that the shaver is charging
(see section ‘Charging’ in chapter ‘The display’).
Using the shaver
Shaving
1 Press the on/off button once to switch on the
shaver.
The display lights up for a few seconds.
,
,
,
ENGLISH
36