1 Pull the shaving unit straight off the shaver.
Note: Do not turn the shaving unit while you pull it off
the shaver.
2 Pull open the three shaving heads one by one.
3 Press the retainer release tab (1) until the
retainer opens (2).
Note: Do not clean more than one cutter and shaving
guard at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard, it
may take several weeks before optimal shaving
performance is restored.
4 Remove the cutter from the shaving guard.
5 Clean the cutter with the brush supplied.
ENGLISH
44
To Next Page
Loading...
