Philips S Line 221S9A - Operating the monitor

6
2. Setting up the monitor
Connecting to your PC
1
2
3
4
5
6
1
AC power input
2
HDMI input
3
VGA input
4
Audio input
5
Headphone out
6
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor rmly.
2. Turn o your computer and unplug its
power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your computer
and your monitor into a nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
2.2 Operating the monitor
Description of the control buttons
7
6
25
4
3
1
Switch monitor’s power ON
and OFF.
Access the OSD menu .
Conrm the OSD adjustment.
Adjust the OSD menu.
Adjust the speaker volume.
Change the signal input
source.
Return to previous OSD level.
SmartImage. There are
multiple selections:
Standard, Internet, Game,
EasyRead, LowBlue Mode.