Philips S6640 - Shaving Heads Replacement Reminder Still Showing; Shaving Head Symbol Suddenly Appeared on Display; SmartClean System; SmartClean System Does Not Work When On;Off Button is Pressed

Problem Possible cause Solution
Hairs or dirt
obstruct the shaving
heads.
Clean the shaving heads
in the regular way or clean
them thoroughly (see
'Thorough cleaning').
I replaced the
shaving heads,
but the
replacement
reminder is still
showing.
You have not reset
the replacement
reminder.
To reset the replacement
reminder, press and hold
the on/off button for more
than 7 seconds.
A shaving head
symbol has
suddenly
appeared on the
display.
This symbol is the
replacement
reminder.
Replace the shaving
heads.
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
SmartClean system
Problem Possible cause Solution
The SmartClean
system does not
work when I
press the on/off
button.
The SmartClean
system is not
connected to the
wall socket.
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
Place a new cleaning
cartridge in the SmartClean
system.
35
English