ENGLISH
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C 6 Clean the cutter and comb under warm
tap water.
C 7 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C 8 Put the shaving head back into the shaving
head holder.
Make sure the projections of the shaving head fit
exactly into the recesses.
C 9 Place the retaining ring holder on the
retaining ring (1), place it on the shaving
head (2) and turn clockwise (3) to reattach
the retaining ring.
10 Repeat the process for the other two
cutters and combs.
11 Reattach the shaving head holder to the
bottom part of the shaving unit.
31
1
3
2
14_S9321.indd 31 6/26/14 3:15 PM
To Next Page
Loading...
