Cleaning and maintenance
Cleaning the shaver in the SmartClean
system
- SmartClean system Pro also has two phases: the
rinsing phase and the drying phase. It also has a
progress bar to show the progress of the two
phases.
Preparing the SmartClean system for use
Do not tilt the SmartClean to prevent leakage.
Note: Hold the SmartClean while you prepare it for
use.
1 Put the small plug in the back of the
SmartClean system.
2 Put the adapter in the wall socket.
3 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
4 Pull the seal off the cleaning cartridge.
25ENGLISH
To Next Page
