Philips SA4VBE08KN/12 - PC Connection Preferences; Formatting the Device; Restoring Factory Settings

24 EN
[MTP] during the sync to the player,
allows copyright protected music
to be converted to playable
formats through Philips Songbird.
Tip

*Make sure that you select [Enable] in > CD-ROM.
Information
In [Information], learn the following information
about the player:
[Player information]
[Model:] full product name
Check the full product name
    
support website.
[Firmware
version:]
  
   
    
support website.
[Support
site:]
web site that provides support for
the player
[Disk space]
[Free space:] space available
[Total space:] memory size
[Songs] space that songs occupy
[Pictures] space that pictures occupy
[Videos] space that videos occupy
[File type supported]
[Music]     
[Pictures]     
[Videos]     
Format device
Format the player. You remove all the data that
are stored on the player.
 Select [Format device], and then,
select [Yes] as prompted.
Factory settings
In [Factory settings], restore the player to
factory settings. Files transferred to the player
are retained.
CD installer
If you have selected [MSC] in > [PC
connection preference], the [CD installer]
options are displayed.
In [CD installer], select [Enable] to allow
the player to work as Philips Songbird drive.
Double click on the drive to start the program
installation on the PC.
Tip

After you repair the player, the CD-ROM partition and
Philips Songbird installer are removed from the player
(see 'Repair the player through Philips Songbird' on
page 34). More space is available on the player.