Philips Savvy - Set Up Security Codes

You can use security codes to prevent other people making calls from your phone.
We recommend you make a note of the codes and keep them in a safe place.
set up security codes
3.1
PIN (Personal Identification Number)
Your SIM Card comes with a default PINnumber of
1111. The phone is set so that you do not need to
enter this number to use the phone.
However, to prevent unauthorised use of your phone
(if stolen for example) we recommended you do
the following:
■
Change the PINnumber, (so that only you know it).
■
Set your phone so that the PINmust be entered
every time you turn the phone on.
to change the PIN number
1 Press ‘MENU’.
2 Press ‘>’ on the compass key four times to
move right from <Names> to <Security .
3 Press ‘OK’, you will see <PINcode>.
4 Press ‘OK’, you will see <Set on .
5 Press ‘OK’, you will see Enter PIN:.
6 Enter your existing PINnumber (which is 1111 if you
have not yet changed your PINnumber). Press ‘OK’.
You will see the word ‘Activated’, then <PINcode>
7 Press ‘<’ on the compass key to move from <PIN
code> to Change PIN>.
8 Press ‘OK’, you will see Old PIN:.
9 Enter your existing PIN number (which is 1111 if you
have not yet changed your PINnumber). Press ‘OK’.
10 You will see New PIN:.
11 Enter your choice of a minimum of 4 and a maximum
of 8 digits. Press ‘OK’.
12 You will see Repeat PIN:.
13 Enter your new number again, press ‘OK’.
14 You will see PIN correct.
15 Press ‘MENU’, to return to the main display.
You have now changed your PINnumber.
Please make a note of the code and keep it in a safe
place.