use your Phonebook
How to store a name and number in your Phonebook is explained in detail in section 2.6.
Below is information on how to use the Phonebook easily and efficiently.
3.9
viewing your Phonebook
1 Press ‘OK’ to enter the Phonebook. You can use the
keys to go straight to names in your Phonebook
which start with the same letter as the first letter on
the key. For example, to go to ‘John’ (or any other
name beginning with J) press key 5.
2 Press ‘<’ or ‘>’, to move left or right.
3 P ress ‘OK’ to see the number. P ress ‘OK’ again for
further options.
4 Choose from the following options:
Delete> to delete the entry.
<Send msg> to send the selected entry a message.
<Usual msg.> to send the selected entry a
pre-programmed message.
<Voice dial> to record a voice tag or play back a
stored ‘Voice tag’.
<Change to amend the entry.
search for a specific name
1 Press ‘MENU’, then press ‘OK’ to go to <View>.
2 Press ‘<’ on the compass key to move left from
<View> to Search>.
3 Press ‘OK’. You will see ‘Search for:’ in the display.
4 Enter the first few letters of the name you are seeking.
5 Press ‘OK’, then press to call the number, or ‘OK’
for other display prompted options.
edit or delete a name or number
1 Press ‘OK’ from the main display and select the name
from the Phonebook entry you want to change or
delete.
2 Press ‘OK’twice, then press ‘<’ or ‘>’ to choose
either Delete> or <Change .
3 Press ‘OK’, then follow the display prompts.
To Next Page
Loading...
