EasyManua.ls Logo

Philips SCD501 - Page 6

Philips SCD501
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
2 Insert the non-rechargeable batteries or fully
charged rechargeable batteries.
D
Note:
Make sure the + and - poles of the batteries
point in the right direction.
3 To reattach the battery compartment lid, rst
insert the lugs into the bottom rim of the
battery compartment. Then push the lid home
until it locks into place with a click.
6.2.1 Operation on electrical power
1 Put the small plug in the socket in the side
panel of the parent unit and put the adapter
in an electrical outlet.
6.2.2 Inserting the batteries
If the parent unit is not close to an electrical
outlet, you can run it on two 1.5V R6 AA alkaline
non-rechargeable batteries or two 1.2V R6
AA rechargeable batteries (not supplied). The
operating time on full batteries is up to 24 hours,
depending on the type of batteries used and on
how long and how often you use the parent unit
on batteries.
D
Note:
Please note that the parent unit does not charge
the batteries when it is connected to an electrical
outlet. You can use rechargeable batteries in the
parent unit, but you need to charge them in a
separate charger.
B
Warning:
Unplug the parent unit and make sure your
hands and the unit are dry when you insert the
batteries.
1
Press the release button (1) to unlock the battery
compartment lid and remove the lid (2).

Related product manuals