7
7.2 Linking parent unit and baby
unit
1 Press and hold the 3 button on the baby unit
for 3 seconds until the power-on light lights up.
2 Press and hold the 3 button on the parent
unit for 3 seconds until the ‘link’ light starts
ashing red.
• When the parent unit and baby unit are
linked, the ‘link’ light turns solid green.
7 Using the baby
monitor
7.1 Positioning the baby monitor
B Warning:
Keep the baby unit out of the reach of the baby.
Never place the baby unit inside the baby’s bed
or playpen.
• Because the cord of the baby unit presents a
potential strangulation hazard, make sure that
the baby unit and its cord are at least
1 meter/3.5 feet away from your baby.
• To prevent a high-pitched sound from one
or both units, make sure the parent unit is at
least 1.5 meters/4.9 feet away from the baby
unit.
ENGLISH
To Next Page
Loading...
