EasyManua.ls Logo

Philips SHB1400 - Using Your Headset; Basic Operations; Call Management; Voice Features

Philips SHB1400
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Please refer to www.philips.com/welcome for full user manual.
Turn headset on/off
Press until LED turns on/off.
Check battery
Hold VOL + and VOL - simultaneously.
> 50%: 1 blue ash
< 50%: 2 red ashes
< 25%: 3 red ashes
Pick up/ end a call
Press .
Adjust volume Press VOL +/ VOL -.
Redial the last number
Press twice quickly.
Reject a call
Hold .
Activate voice dialing
Hold until beep occurs.
Transfer call to mobile phone
Hold while on a call.
Mute the Mic
Press twice quickly during a call.
Using your headset
*Available if supported by your mobile phone.
The red/blue LED ashes alternately. The headset is ready for pairing.
The blue LED ashes once every 3
seconds.
The headset is connected to the phone.
The red LED ashes twice every 5
seconds.
The headset is not connected.
The blue LED ashes once every half a
second.
There is an incoming/outgoing call.
The blue LED ashes once every second. The headset is active on a call.
The red LED ashes three times and
beeps twice every minute.
The battery is low in power.
Solid red LED The headset is charging.
The LED is off. The headset is off./Charging is nished.
The headset beeps every 5 seconds The Mic is muted.
LED and sound indication
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V2.0
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome

Related product manuals