Philips SHB1400 - User Manual

Quick start guide
Philips Bluetooth stereo headset SHB1400
Charge your headset
1 Remove the USB cap.
2 Plug the headset into a powered USB
port for charging. Red LED will turn
off after the headset is fully charged.
Place the earbud in your ear, and
rotate the headset upwards or
downwards until it ts securely.
For an extra-secure t, attach
the earhook: Push the ball joint
between the earbud and the main
body of the headset. Adjust the
earhook for providing the best t.
Fit your headset Optional
Pair the headset with your mobile phone
1 Ensure that the headset is charged and
turned off.
2 Ensure that the mobile phone is
turned on and its Bluetooth feature is
activated.
3 Press until the LED starts ashing
red and blue alternately. Do not stop
pressing the button after seeing the
blue LED only.
4 Pair the headset with the mobile
phone. For details, refer to the user
manual of the mobile phone.
Settings Connectivity
Select
Back
Enter Password
Settings
Devices Found
Select
Back
Philips SHB1400
Settings Connectivity
Bluetooth
Select
Back
Add
Bluetooth
device
''0000''
not required for
some mobile phones.
EN

Summary

Charge Your Headset

Remove USB Cap

Remove the USB cap from the headset before charging.

Connect to USB Port

Plug the headset into a powered USB port for charging. Red LED indicates charging.

Headset Fitting

Adjust for Secure Fit

Place earbud in ear and rotate headset upwards/downwards for a secure fit.

Optional Earhook Attachment

Attach the earhook for an extra-secure fit by pushing the ball joint and adjusting.

Pairing with Mobile Phone

Prepare Headset and Phone

Ensure headset is charged/off and phone is on with Bluetooth activated.

Initiate Pairing Mode

Press the button until the LED flashes red and blue alternately.

Complete Pairing Process

Pair the headset with the mobile phone, referring to the phone's user manual for details.

Using Your Headset

Basic Operations

Instructions for turning headset on/off, checking battery, and adjusting volume.

Call Management

How to pick up/end calls, redial, reject, and transfer calls.

Voice Features

Instructions for activating voice dialing and muting the microphone.

LED and Sound Indicators

Pairing and Connection Status

LED indications for ready for pairing, connected, and not connected states.

Call and Battery Status

LED indications for incoming/outgoing calls, active calls, and low battery.

Charging and Mute Status

LED and sound indications for charging, charging finished, and mic muted.

Philips SHB1400 Specifications