Philips SHB7102 - Page 2

Issue date 2012-01-20
Version: 2.0.4
12 NC: 8670 000 33679
EAN: 87 12581 36222 5
© 2012 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Specifications
SHB7102/93
Bluetooth stereo headset
Highlights
Bluetooth 3,5mm adapter incl.
Simply plug the 3.5mm Bluetooth audio adapter into
the standard headphone jack. The audio adapter
picks up your music player's audio signal and
converts it into a wireless Bluetooth signal that can
be received by your Bluetooth Headphones.
Bluetooth HSP/HFP compliant
Bluetooth is a cable replacement technology.
Bluetooth is a global standard, so Bluetooth devices
of different manufacturers can interoperate using
shared Bluetooth profiles. HSP (Handset Profile) and
HFP (Handsfree Profile) are the profiles required for
typical Bluetooth headset operations. If your mobile
phone is compliant to HSP or HFP (like virtually any
Bluetooth enabled phone) this headset will work
with it. The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any use of such
marks by Koninklijke Philips Electronics N.V. is
under license.
Bluetooth® Stereo (A2DP)
This Philips device fully supports Bluetooth Stereo
(A2DP). A2DP (Advanced Audio Distribution
Profile) compliance enables this headset to receive
stereo music from any Bluetooth device that is
A2DP compliant. Therefore you can use this headset
with any compatible mobile phone, PC, Bluetooth
adapter, MP3 player etc. that supports A2DP.
Digital stereo sound quality
The audio signal is transferred wirelessly as a digital
signal and is only converted to analog in the device
itself. This means that interference noise has less
influence on the sound quality than with analog
technologies. The sound playback will be true to the
orignal recording and sound source.
SwitchStream
With SwitchStream you will hear a ring tone in your
headset when you are receiving a call on your
Bluetooth enabled phone. You can then pick up the
call from your headset and return to your music
after ending the call. Never miss a a beat, never miss
a call.
TailorMate headphone concept
With TailorMate you can use the headset pendant
with any 3.5mm jack headphone to match your style.
Connectivity
• Bluetooth profiles: A2DP, AVRCP, Handsfree,
Headset
• Bluetooth version: 1.2
• Maximum range: up to 33 feet / 10 m
• Bluetooth QD ID: B012309 (headset) B012308
(adapter)
Power
• Talk time: Up to 10 hrs
• Standby time: Up to 210 hrs
• Music playtime: 8 hr
• Rechargeable
•Battery Type: LI-Polymer
• Battery weight: 6.5g (headset) 6.5g (adapter)
Sound
• Magnet type: Neodymium
• Speaker diameter: 10 mm
Convenience
•Volume control
• Call Management: Answer/End Call
, Reject Call,
Last number redial, Voice dial, Call Transfer,
Switch between call and music
Accessories
• Charger: USB charging cable included. No wall
outlet charger included.
Dimensions
• Product dimensions (WxDxH): 22x18x54 mm
(pendant)
• Product weight (g): 22 g (pendant)
Green Specifications
• Lead-free soldered product
Inner Carton
• Gross weight: 1.56 kg
• Inner carton (L x W x H): 19.6 x 19.4 x 24.9 cm
• Nett weight: 1.14 kg
• Tare weight: .42 kg
Outer Carton
• Gross weight: 7.15 kg
•Outer carton (L x W x H): 40.6 x 40 x 26.4 cm
• Nett weight: 4.56 kg
• Tare weight: 2.59 kg
Packaging dimensions
• Packaging dimensions (W x H x D):
17.8 x 21.8 x 6.2 cm
• Gross weight: .46 kg
• Nett weight: .38 kg
• Tare weight: .08 kg
•