7EN
4 Use your
headphones
Connect to Bluetooth
Connect the headphones to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold to turn the headphones
on.
» The blue LED ashes.
» The headphones are reconnected
to the last connected mobile phone/
Bluetooth device automatically.
Tip
• If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headphones, you have to reconnect the headphones
and mobile phone/Bluetooth device manually.
• If your mobile phone/Bluetooth device cannot
reconnect automatically, try to reconnect manually
by clicking the headphones' name again under the
Bluetooth setting manual on your mobile phone/
Bluetooth device.
Note
• If the headphones fail to connect to any Bluetooth
device within range in 5 minutes, it will switch off
automatically to save the battery life.
Manage your calls and music
On/off
Task Button Operation
Turn the
headphones
on.
Press and hold for 4
seconds.
Turn the
headphones
off.
Press and hold for 4
seconds.
» The white
LED is on and
fades out.
Music control
Task Button Operation
Play or
pause
music.
Press once.
Adjust
volume.
Volume/track
control
+/-
Press once
or press and
hold.
Skip
forward.
Volume/track
control
Press once.
Skip
backward.
Volume/track
control
Press twice.
Call control
Task Button Operation
Pick up/hang up
a call.
Press once.
» 1 beep.
Reject an
incoming call.
Press and hold
for 2 seconds.
» 1 beep.
Switch caller
during a call.
Volume/
track
control
Press once.
» 1 beep.
Mute/unmute the
microphone in
a call.
/
Press once.
» 1 beep.
Voice control
Task Button Operation
Siri/Google Now. Press once.
To Next Page
Loading...
