Philips Sonicare 2 Series - Caution

Charging your Sonicare
1 Plug the charger into a live electrical outlet.
2 Place the handle on the charger.
, Thebatterylevelindicatorashestoindicate
that the toothbrush is charging. When the
lightstopsashingandturnssolidgreenthe
toothbrush is fully charged.
Note: It can take up to 48 hours to fully charge the
battery, but the Sonicare may be used before it is
fully charged.
Using your Sonicare
Brushing instructions
1 Wet the bristles and apply a small amount
of toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle towards the gumline.
3 Press the power on/off button to turn on
the Sonicare.
4 Apply light pressure to maximize Sonicare’s
effectiveness and let the Sonicare toothbrush
do the brushing for you. Do not scrub.
5 Gently move the brush head slowly across
the teeth in a small back and forth motion so
the longer bristles reach between the teeth.
Continue this motion throughout the brushing
cycle.
ENGLISH 7