Philips Sonicare DiamondClean 9000 - Page 15

* Note:
- All brush heads work with each mode.
- When the Philips Sonicare toothbrush is used in clinical
studies, it must be used at high intensity, with the EasyStart
feature turned off.
Brush head mode pairing
Brush heads with BrushSync technology are equipped with a
microchip which communicates to the handle and automatically
pairs it with the recommended mode and intensity.
Note:If you change modes/intensity, the brush head will
remember the last used setting. If you wish to brush with the
recommended setting, you can find the recommended
mode/intensity in ‘Brushing Modes’.
Brush head mode pairing
Brush heads with BrushSync technology are equipped with a
microchip which communicates to the handle and automatically
pairs it with the recommended mode and intensity.
Note:If you change modes/intensity, the brush head will
remember the last used setting. If you wish to brush with the
recommended setting, you can find the recommended
mode/intensity in the following table.
15
English