Massage mode
Mode for gentle gum stimulation.
Brushing routines
Go Care routine
1-minute brushing cycle in the Clean mode, for a quick clean. You
hear the Quadpacer signal at 15-second intervals.
Max Care routine
3-minute brushing cycle that combines the Clean and Massage
modes in one routine for a thorough mouth clean. There are 30
seconds of Clean mode and 15 seconds of Massage mode for each of
the 4 sections of your mouth. You will hear the Quadpacer signal at
45 second intervals.
Note: When Philips Sonicare is used in clinical studies, the default
2-minute Clean mode must be selected. The handle should be fully
charged. Deactivate the Easy-start feature and for areas where
excess staining occurs, an additional 30 seconds of brushing time can
be spent to assist with stain removal.
Features
Easy-start
This Philips Sonicare comes with the Easy-start feature activated.
The Easy-start feature gently increases the power over the first 14
brushings to help you get used to the brushing with the Philips
Sonicare.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
12
English
To Next Page
Loading...
