Using your Philips Sonicare
Brushing instructions
1 Press the brush head onto the handle in
such a way that the bristles will face the
front of the handle.
2 Firmly press the brush head down onto the
metal shaft until it stops.
Note: It is normal to see a slight gap
between the brush head and the handle.
3 Wet the bristles.
4 Apply a small amount of toothpaste on the
bristles.
5 Place the toothbrush bristles against the
teeth at a slight angle (45 degrees), pressing
firmly to make the bristles reach the
gumline or slightly beneath the gumline. A
change in vibration (and a slight change in
sound) alerts you when you apply too much
pressure while brushing.
Note: Keep the center of the brush in
contact with the teeth at all times.
11
English
To Next Page
Loading...
