Philips Sonicare - To Turn Off;Reactivate Easy-Start Feature; Smartimer;2-Minute Timer

8
B
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly advance through the Easy-start ramp-up cycle.
To turn off or reactivate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 To deactivate Easy-start:
Press and hold the power button for 2 seconds.You will hear 1 beep to
indicate that the Easy-start feature has been deactivated.
4 To reactivate Easy-start:
Press and hold the power button until you hear 2 beeps.This indicates
that the Easy-start feature is active again.
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing
plaque.
The Easy-start feature should be deactivated when Sonicare is used in
clinical trials.
Smartimer\ 2-minute timer
◗ All Sonicare models come with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.After these 2 minutes, your
Sonicare will automatically turn off. If you wish to brush for a
longer period, simply press the power button and another 2-
minute cycle will start.
◗ If you wish to pause or stop brushing during your 2-minute cycle,
press the power button. If you press the power button again, the
Smartimer will resume where you left off.
B
The Smartimer will automatically reset to the beginning of a 2-minute
cycle if:
- brushing is paused for 30 seconds or longer;
- the handle is returned to the charger.
4235 020 01181 14-01-2003 16:52 Pagina 8 (Zwart/Process Black Plaat)