4 Rinse the hair chamber and shaving head
holder under the tap.
While rinsing the shaving unit, water may drip
out of the bottom of the shaver. This is a normal
occurrence.
5 Carefully shake o excess water and let the
shaving head holder air-dry completely.
6 Attach the shaving head holder to the bottom
part of the shaving unit (‘click’).
Thorough cleaning
We advise you to clean the shaving heads
thoroughly once a month or when the shaver does
not shave as well as it used to.
1 Switch o the shaver.
2 Pull the shaving head holder o the bottom part
of the shaving unit.
English
50
SP9863_3sku_EN_A6_CS6_0620.indd 50 18/06/20 15:53
To Next Page
Loading...
