10 Place the retaining ring on the shaving head.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is xed.
12 Attach the shaving head holder to the bottom
part of the shaving unit (‘click’).
Cleaning the trimmer attachment
Never dry the trimmer with a towel or tissue, as
this may damage the trimming teeth.
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision
trimmer attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch o the appliance.
4 Carefully shake o excess water and let the
attachment air-dry completely.
Tip: For optimal performance, lubricate the teeth
of the attachment with a drop of sewing machine
oil regularly.
2
1
English
52
SP9863_3sku_EN_A6_CS6_0620.indd 52 18/06/20 15:53
To Next Page
Loading...
