Replacement reminder
The replacement reminder indicates that the
shaving heads need to be replaced. The shaving
unit symbol lights up continuously, the arrows
ash white and you hear a beep when you switch
the shaver on or o.
1 Switch o the shaver. Pull the shaving head
holder o the bottom part of the shaving unit.
2 Discard the old shaving head holder and attach
the new shaving head holder to the bottom part
of the shaving unit (‘click’).
3 After replacing the shaving heads, you can reset
the replacement reminder by pressing the on/
o button for 7 seconds. Wait until your hear 3
beeps.
If you do not reset the replacement reminder,
the shaver resets automatically after 9 shaves.
7 sec.
English
55
SP9863_3sku_EN_A6_CS6_0620.indd 55 18/06/20 15:53
To Next Page
Loading...
