3 Slowly move the trimming head along the rim of
the ear to remove hairs that stick out beyond
the rim.
4 Carefully insert the trimming head into the
outer ear channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could
damage the eardrum.
5 Slowly turn the trimming head around to
remove all unwanted hairs from your outer ear
channel.
6 Switch off the appliance and clean the
attachment after use (see 'Deactivating the
travel lock').
Travel lock
You can lock the shaver when you are going to
travel to prevent it from turning on accidentally.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
While you activate the travel lock, the travel lock
symbol lights up briefly and the shaver
produces a short sound. When the travel lock is
activated, the travel lock symbol flashes.
If you try to switch on the shaver while the
travel lock is active, the travel lock symbol
flashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
25
English
To Next Page
Loading...
