Cleaning the nose trimmer attachment
Clean the nose trimmer attachment every time you
have used it.
1 Switch off the appliance.
2 Rinse the trimming head of the nose trimmer
with hot water.
3 Switch on the appliance and rinse the trimming
head once more to remove any remaining hairs.
Then switch off the appliance again.
If rinsing the trimming head under the tap is not
sufficient, immerse the trimming head in a glass
with warm water for a few minutes. Then switch
on the appliance and rinse it under the tap.
4 Carefully shake off excess water and let the
nose trimmer attachment dry.
Tip: For optimal trimmer performance, lubricate
the trimming head with a drop of sewing machine
oil every six months.
Replacement
Replacing the shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
32
English
To Next Page
Loading...
