Philips SPC900NC - Connecting the Webcam to Your PC; Laptop

EN
10
Connecting the WebCam to your
PC / laptop
1 Be sure to run the installation CD first, before connecting the
WebCam to the PC / laptop.
2 Turn on the PC / laptop.
3 Connect the USB plug of the USB cable to the USB port of
the PC / laptop.
> The WebCam will now derive its power from the PC / laptop.
4 Use the clamp and the two rubber rims to attach the
WebCam to your PC monitor or laptop screen or fold out
the clamp and place the WebCam on your desk.
Installation
4
4
4
3
3