3. Get started
CAUTION
Before you connect the device, rst read the
Safety instructions [3].
Installation
1. Turn on the computer.
2. Connect the dictation microphone to the computer us-
ing the USB cable.
3. The New Hardware Found message is displayed and in-
stallation will proceed automatically.
NOTE
Using SpeechMike with third-party dictation soft-
ware other than Philips SpeechExec requires the
installation of additional software like Speech-
Control (Philips Device Control Center). You can
download the latest version from our website:
https://www.dictation.philips.com/speechcontrol.
6
To Next Page
Loading...
