Need help?Do you have a question about the Philips SpeechMike Premium and is the answer not in the manual?
General| Signal-to-Noise Ratio | > 70 dB |
|---|---|
| Interface | USB |
| Polar Pattern | Unidirectional |
| Compatibility | Windows, Mac |
| Sampling Rate | 16 kHz |
| Bit Depth | 16 bit |
| Cable Length | 2.5 m |
| Buttons | Record, Play, Stop, Forward, Backward |
| Sensitivity | -37 dBV/Pa |
Guidelines to protect the device from damage and ensure safe operation, including protection from liquids and heat.
Procedures for cleaning and disinfecting the device using soft cloths and approved disinfectants.
Instructions on how to properly dispose of old products according to local regulations.
Explanation of symbols like TIP, NOTE, and CAUTION used to convey important information.
Lists the items provided with the SpeechMike, such as the dictation microphone, USB cable, and quick start guide.
Detailed identification and description of all buttons, keys, and features of the SpeechMike device.
Step-by-step guide for connecting and installing the SpeechMike on a computer.
Instructions on how to create, start, stop, and mark recordings using the SpeechMike and software.
How to use the SpeechMike's barcode scanner feature for data input.
Guide to personalizing SpeechMike functions and keys using the Philips Device Control Center.
Setting up custom shortcuts to control applications with SpeechMike buttons.
Creating and assigning custom button functions for specific applications.
Enabling automatic microphone muting or custom functions based on device movement.
Steps to upgrade the SpeechMike's internal program (firmware) to the latest version.
Instructions on adapting the barcode scanner to local keyboard language and settings.
Instructions on how to switch between the available button modes on the SpeechMike.
Details the default mode where each button is assigned a command for controlling applications.
Assigns buttons to shortcuts for controlling applications and Dragon NaturallySpeaking.
Enables control of Windows speech recognition software using pre-configured shortcuts.
Allows operation of Dragon NaturallySpeaking on Mac computers with pre-configured shortcuts.
Enables operation of Dragon NaturallySpeaking on Windows computers with pre-configured shortcuts.
Details the connection interfaces and standards used by the SpeechMike, primarily USB.
Provides technical details on the microphone type, frequency response, and speaker output.
Lists compatible barcode formats and specifies the laser class for the scanner module.
Outlines the necessary processor, RAM, hard disk space, and operating system for the SpeechMike.
Specifies the temperature and humidity ranges for optimal device operation.
States compliance with FCC Rules for Class B digital devices and limitations on modifications.
Confirms that the product adheres to relevant European Union guidelines.
Details availability of source code for open source software used in the product.
To Next Page