Philips SPF4610 - 7 Setup; Select an On-Screen Language; Adjust Display Brightness; Set Time and Date

11
English
EN
Adjust display brightness
1
Select [Brightness], and then press OK.
2 Select a brightness level, and then press
OK.
Set time and date
1
Select [Set Time]/[Set Date], and then
press OK.
2 Press / / / to set time/time format or
date, and then press OK.
Note
If the PhotoFrame is disconnected from the •
power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
7 Setup
1 In the home menu, press / to select
[Settings], and then press OK.
Select an on-screen language
1
Select [Language], and then press OK.
2 Select a language, and then press OK.