Philips v2.0 User Manual

IR Dongle
v2.0
December 2018
Quick Start Guide
Work with IR Dongle
v2.0 in the field
This dongle is for use with compatible
phones to enable IR (infrared) for field
configuration and grouping of EasySense,
office/industry sensor families.
Luminaires
Importance of installer’s positioning for correct commissioning
of SNH200 using IR Dongle
Tips for Use:
✓ Allow all pop-up messages in Philips Field Apps (e.g. “Allow
Philips Field Apps to record audio? Allow Philips Field Apps
to access photos, media and files on your device?”).
✓ Aim the emitter of the dongle at the target luminaire using
the IR dongle and check the light behavior according to
steps in the App to confirm the command gets executed.
(light dimmed, light blinks twice, etc.)
✓ Invert Signal in the Preferences within app when the LED
blinks 6 times.
Note: Remember to switch off the LEDs when not in use to
save battery and for longer lifetime
Working with Philips Field Apps
You must first register for Philips Field Apps to receive a
username and password, then download Philips Field Apps
from Google Play Store.
Technical specifications
Maximum mounting height Ambient temperature range
16m/50ft From -10 ºC to 50 ºC
Ordering data
Commercial product name 12NC
IR Dongle v2.0 929001678906
For compatible phones, refer to the technical downloads.

Philips v2.0 Specifications

General

Brand	Philips
Model	v2.0
Category	Computer Hardware
Language	English

Summary

Work with IR Dongle v2.0 in the Field

Tips for Using the IR Dongle

Provides essential tips for optimizing the use of the IR Dongle with Philips Field Apps.

Philips Field Apps Integration

Details the process of registering for and using Philips Field Apps for dongle functionality.

Ordering Information

Lists the commercial product name and 12NC for the IR Dongle v2.0.

Technical Specifications Overview

Presents key technical details including mounting height and ambient temperature range.

IR Dongle Visual Feedback and Selection

Visual Feedback Indicators

Explains the meaning of LED blink codes for operational status and error conditions.

Selection Switch Functionality

Describes the dual-LED selection switch for choosing between short and long distance communication.

IR Dongle Battery Replacement

Battery Replacement Procedure

Step-by-step guide for disassembling the IR dongle and replacing the CR2032 battery.