Alignments
EN 120 Q529.1A LA8.
Table 8-2 Tint settings
8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
• After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched “off” / “stand-by” and “on” again with the Mains
switch (the NVM is then read again).
8.4.2 Dealer Options
For dealer options, in SAM select “Dealer options” and then
“Personal options”.
Table 8-3 Dealer options
8.4.3 (Service) Options
Select the sub menu's to set the initialization codes (options) of
the set via text menus.
Table 8-4 Service options
Colour Temp. R G B
Cool 113 119 123
Normal 124 117 115
Warm 127 105 77
Menu item Subjects Options Description
Personal Options Picture Mute On Picture is muted / not muted in case no input signal is detected at input connectors
Off
Virgin Mode On TV starts up / does not start up (once) with a language selection menu after the Mains switch is turned “on” for the
first time (virgin mode)
Off
Menu-item Subjects Options Description
PIP/DS Dual Screen None No DS
One tuner dual screen One tuner DS
Two tuner dual screen Two tuner DS
Display Screen “Value” Used screen size, type, and resolution (see table “Option code overview” in this
chapter)
Dimming Backlight On / Off Feature present / not present
Video Repro Perfect Pixel On / Off Perfect Pixel On / Off
Ambient Light Off / Mono / Stereo/Triple / Quad Inverter not present / one inverter / two inverters / three inverters / four inverters
Ambient Light technology CCFL / LED CCFL / LED
Ambient Light driver Pacific 3 / MOP / DFI Ambient Light driver
MOP Present / Not present MOP present / not present
Light sensor Present / Not present MOP present / not present
Light sensor type Step / ME7 / MS7 / ME8 / Canvas / Aurea Styling
Source selection HDMI 3 Present / Not present HDMI 3 Present / Not present
HDMI CEC On / Off HDMI CEC On/ Off
Audio Repro Acoustic System (Cabinet design,
used for setting dynamic audio
parameters)
None
Top A 2k8
MS7 model A 2k8
MS7 model B 2k8
ME7 32" 2k8
ME7 model A 2k8
ME7 model B 2k8
Step 63 Combat Coscone 2k8
Aurea
ME8
Miscellaneous Tuner Type TD1736 / TD1716 TD1736 = US, TD1716 = Europe
Nyquist SAW filter On / Off SAW filter on/off
I
2
C configuration with PCA9540 / with PCA9515 /
via channel decoder
Upgrade assistant Present / Not present
Opt. no. Group 1 xxxxx xxxxx xxxxx xxxxx (see set sticker)
Group 2 xxxxx xxxxx xxxxx xxxxx (see set sticker)
Store Store
To Next Page
Loading...
