Philips VR215/02 - Replaying cassette continuously

CChhaannggiinngg tthhee TTVV ssyysstteemm
When playing back cassettes which have been recorded with
signals from a different TV system there may be interference with
the colour.To deactivate the automatic change to a different TV
system, you must follow these steps.
PP
AARRDDOONN
??
TTVV ssyysstteemmss
Other countries, other TV systems: In central Europe
transmissions are broadcast in the PAL-System (Phase
Alternation Line) Standard, while in France SECAM
(Séquentiel à mémoire) is used. In some countries
(USA and Japan), TV viewers receive their
programmes as an NTSC signal (National Television
System Committee). Many TV and video sets can
process and show several transmission systems,
REPLAYING CASSETTE CONTINUOUSLY/CHANGING TV SYSTEM ENGLISH
40
40
RReeppllaayyiinngg ccaasssseettttee ccoonnttiinnuuoouussllyy
This function can be used to play a tape over and over again. If
the end of the cassette or of the recording has been reached, the
video recorder automatically rewinds to the start of the tape and
starts to play back again.This function is activated or deactivated
as follows:
1 Press the
MMEENNUU
button on the remote
control.The on-screen menu appears
2 Use
==PP--
or
;;PP++
to select the option
SPECIAL SETTINGS and confirm
with
OOKK
4 Use
SS++ PP
or
QQSS--
to select the
setting ON (continuous playback) or OFF
(no continuous playback) and confirm with
OOKK
The screen will briefly show STORED
3 Use
==PP--
or
;;PP++
to select the option
REPEAT PLAY
7 Press the Playback button
CC
to start the
playback or continuous playback (depending
on the setting)
5 Complete the adjustment of continuous
playback with the
MMEENNUU
button
6 Insert a cassette
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
SPECIAL SETTINGS
EXITPMENU OK
SPECIAL SETTINGS
OSD ON
CLOCK DISPLAY OFF
COUNTER QT.LEFTP
SAT RECORDING OFF
REPEAT PLAY OFF
DIRECT RECORD OFF
EXITPMENU STOREPOK