41
How to check, change or delete a
programmed recording (TIMER)
1 Switch on the TV set. If required, select the programme number for
the video recorder.
2 Press TIMER k on the remote control twice .
3 Select the programmed recording (TIMER) you want to check, change
or delete with P =r or P ;q .
Delete programmed recording
Press CLEAR (CL) .
'--' appears rather than the displayed values
To end, press MENU .
4 Press TIMER k .
Select the input field with QSr or SqP .
If required, change the information with P ;q , P =r or the
number buttons 0-9 .
5 Confirm with OK .
6 Switch off with STANDBY/ON m .
ENGLISH
Programming a recording (TIMER)
To Next Page
Loading...
