35
Programming a recording
(with 'ShowView')
Thanks to this programming system, you no longer need to do tediously enter the date,
programme number, start and end time. All the information needed for programming is
contained in the ShowView-programming number. This 9-digit ShowView number is found in
every TV listings magazine.
1 Switch on the TV set. If required, select the programme number for
the video recorder.
2 Press TIMER k on the remote control.
3 Enter the entire ShowView number. This number is up to 9 digits long
and can be found next to the start time of the TV programme in your
TV listings magazine.
e.g. 5-312-4 or 5 312 4
Enter 53124 for the ShowView-number.
If you make a mistake, you can clear your instructions with CLEAR
(CL) .
SHOWVIEW
SHOWVIEW NUMBER REP.
53124---- èONCE p
________________________________
REP.pSELECT STOREpOK
TIMER LISTpTIMER
Selecting onetime/daily/weekly recordings
Using SELECT , select from the following options:
'ONCE': Recording once
'MO-FR': Repeated daily recordings (Monday to Friday)
'WEEK.': Repeated weekly recordings (every week on the same day)
4 Confirm with OK .
ENGLISH
Programming a recording (TIMER)
To Next Page
