Philips VR900/07 - Automatic Switch-Off (Tuner Mode); Switching off the Button Illumination

Automatic switch-off (tuner mode)
If you do not use the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver (tuner).
a Switch on the TV set and select the programme number
for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the B or
A button and confirm with the menu button C .
d Select the line ’AUTO STANDBY’ with the B or A
button.
e Select ’OFF’ with the D or C button. If you select
’ON’, the function will be switched on.
f Confirm with the OK button.
g To end, press the MENU button.
DA TIMER recording only works when the video
recorder is switched to standby.
The ’DEMO’ function
When the ’DEMO’ function is switched on and the video
recorder switched off, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the B or
A button and confirm with the C button.
d In the line ’DEMO’, select ’ON’ with the C or D button.
If you select ’OFF’ the function will be switched off.
e Confirm with the OK button.
f To end, press the MENU button.
DThe ’DEMO’ function is not possible during a ’TIMER
recording’ and during an ’Automatic recording from
a satellite receiver’.
Switching off the button illumination
You can switch off the button illumination on the front of the
machine.
a Make sure there is no cassette in the machine. Press the
PLAY G and PROGRAMME A buttons on the video
recorder at the same time with the video recorder
switched off until ’OFF’ appears in the display.
b To end, by pressing STANDBY m .
DTo switch this function back on repeat step a until
’ON’ appears in the display.
30