Using UPnP (for Windows 2000)
1 Insert the PC suite CD into your PC.
2 Click "Install Philips Media Manager" to start the
installation of PMM.
3 Follow the on-screen instructions for the
installation.
4 To launch PMM, double click the icon on the
PC desktop.
5 The first time you launch PMM, click Add Music
> Add Files or Folders to specify music
folders on your PC
6 On WAC3500, press HOME and use the
navigation controls
3 or 4 and 2 to enter UPnP
mode. If you have successfully connected
WAC3500 to the home network where your PC
is also connected to, you should be able to see
the Music Server on the screen of WAC3500
Tips:
• UPnP server may not necessarily be a PC but any content serving device.
• If the PMM cannot be detected after 5 minutes, close the PMM application
and then restart it.
• It is recommended that you do not set the PMM as an auto-startup
application.
D1
To Next Page
Loading...
