Philips WAC3500 - Wireless Network

Connecting to home
wireless network
C1
To connect the Center to the wireless network:
• Press MENU
• Select Settings > Network > Wireless > (Select desired net-
work - SSID) > (Use the remote control to input the encryption
key) > Press OK > Select Automatic > Apply Settings > Ye s
MP3-CD/CD HD FM TUNER HOME
MENU
AUX
SLEEP
.,?!@_ /
1
REPEAT
abc
2
SHUFLE
def
3
SMART EQ
ghi
4
DBB
jkl
5
INCR SURR
MNO
6
SAME ARTIST
pqrs
1
SAME GENRE
tuv
2
RDS/NEWS
wxyz
3
MUSIC BROADCAST LIKE MUSIC
0
MUSIC FOLLOWS ME
REC
CLEAR
SCROLL
MARK/UNMARK VIEW SEARCH
VOL
MUTE
remote control
PCAccess PointWAC3500
Tips:
• Check that the wireless network adaptor of your PC is enabled.
• Position the Center closer to your wireless Access Point.
• Make sure that DHCP is enabled on your wireless Access Point. If it is not
available, choose Static and key in IP configuration
• If you want to return to the original Center connection at factory default
mode, please reset the Center to its default settings (see section 14 of the
User Manual)
• In case you experience trouble setting up your WAC3500 with your home
wireless network after you are done with the steps described above,
please refer to section 18 on Troubleshooting of the User Manual.