11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.
12 Attach the shaving head holder to the bottom
part of the shaving unit (‘click’).
Cleaning the click-on attachments
Cleaning the precision trimmer attachment
Clean the trimmer attachment after each use.
1 Switch on the appliance with the precision
trimmer attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment air-dry completely.
For optimal performance, lubricate the teeth of the
attachment with a drop of sewing machine oil
every six months.
Cleaning the cleansing brush
Clean the attachment after each use.
1 Switch off the appliance.
2 Remove the attachment from the attachment
holder.
3 Rinse the cleansing brush with warm water.
4 Dry the cleansing brush gently with a towel.
32
English
To Next Page
Loading...
