Cleaning the shaving unit
1 Switch off the appliance.
2 Rinse the shaving attachment under a hot tap
for some time.
You can also clean the shaving unit with the
cleaning brush supplied.
3 After rinsing the appliance under the tap, hold
it upright for 10-15 seconds to allow water to
run out of the bottom.
4 Press the release buttons on the shaving
attachment (1) and pull the shaving unit off the
shaving attachment (2).
5 Rinse the shaving unit under a hot tap for
30 seconds.
You can also clean the shaving unit with the cleaning
brush supplied.
6 Carefully shake off excess water and let the
shaving unit dry.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
7 Reattach the shaving unit to the shaving
attachment.
ENGLISH
19
To Next Page
Loading...
