Cleaning the bodygroomer attachment
1 Switch off the appliance.
2 If the trimming comb is still attached, remove it.
You can either push the trimming comb off the
appliance or pull it off, depending on how the comb is
placed on the appliance.
3 Pull the bodygroomer foil off the appliance.
4 Use the cleaning brush supplied to clean the
inside of the bodygroomer attachment or rinse
the inside under the tap.
5 Rinse the bodygroomer foil under the tap.
6 Shake off excess water and place the
bodygroomer foil back into the attachment.
Cleaning the styler attachment
1 Switch off the appliance.
2 Pull the comb off the beard styler attachment.
3
Rinse the beard styler attachment and the
comb separately under a hot tap for some time.
4 Lubricate the trimmer teeth with a drop of
sewing machine oil every six months.
ENGLISH
22
To Next Page
Loading...
