16 Remove the cap from the room temperature
whitening gel syringe. Attach the mixing tip
by aligning the marking and secure it by
turning it one quarter turn clockwise. Using
the blue brush provided, apply whitening gel
to the patient's teeth (1 - 2 mm thick).
Use caution not to disturb the barrier
material. Gingival irritation can occur with
prolonged exposure to the whitening gel.
Note: A small air gap or bubbles in the
syringe due to degassing of the whitening
gel is normal. If the air gap is near the front
of the syringe, purge until both sides of the
barrel extrude gel.
Note: A slight yellow or pink coloring of
the whitening gel is a normal occurrence
from the manufacturing process. There is
no impact on the peroxide content, other
chemical properties, or performance of the
whitening gel. It will not discolor the patient’s
teeth.
17 Once the whitening gel application is
complete, raise the back of the chair so
the patient is in a slightly reclined position
(-45 degree angle) and able to swallow
comfortably while maintaining light pressure
on the bite block.
Note: The light guide is designed to ensure
proper distance and alignment to maintain
correct light exposure on the smile zone.
15English
To Next Page
Loading...