Phillips Connect Smart7 Pro - Page 5

USER MANUAL – SMART7 PRO™
© 2023 Phillips Connect LLC Smart7 Pro User Manual Page 4 of 9
ELECTRICAL / POWER MANAGEMENT
Operating Voltage: 10 V
DC
– 32 V
DC
Power supply to sensors: 12V
DC
/ 500 mA
Peak current draw from tractor: 2 A @ 12 V
DC
•
Battery charger draw: 1 A
•
Sensor draw: 500 mA
•
Telematics draw: 150 mA
Battery Type: Li-ion, rechargeable
•
Nominal Capacity: 10.6 Ah
•
Maximum Voltage: 4.2 V
DC
•
Cell Cycle Life: ≥1000 cycles; ≥80% retention
Solar Panel I
MP
: 0.36 A
Power management modes: Normal (Full power), Listen, Stealth
ENVIRONMENTAL
Ingress Protection Ratings: IP67; IP69K
Operating Temperature: -40°F to 149°F (-40°C to 65°C)
Storage Temperature: -40°F to 113°F (-40°C to 45°C)
Battery Charging Temperature: -4°F to 131°F (-20°C to +55°C)
Operating Humidity: 20% to 90% (non-condensing)
Storage Humidity: 10% to 95% (non-condensing)
MECHANICAL
Dimensions: 13.6” (L) x 7.0” (W) x 4.1” (H) (345 mm x 178 mm x 104 mm)
Weight: 5.31 lbs. (2.40 kg)
Mounting: 6 x 5/16" bolts
CERTIFICATIONS
FCC / IC
PTCRB Cellular