Phillips Connect Smart7 Pro - Page 6

USER MANUAL – SMART7 PRO™
© 2023 Phillips Connect LLC Smart7 Pro User Manual Page 5 of 9
INTEGRATED: GATEWAY SENSORS
• Orientation
•
Vibration
• Temperature
• Battery Voltage
•
Solar Panel Current
• Primary Input Voltage
• Secondary Input Voltage
• GNSS Location
•
GNSS Odometer
• Device Time via GNSS and NITZ
OPTIONAL BUILT-IN SENSORS
Light OutCheck™
Monitoring of all trailer lighting circuits during active use.
On-demand precheck of lighting circuits when tractor power is unavailable.
• Maximum lamp circuit voltage 20 V
DC
• Integrated resettable 5 A fuses (10 A on red circuit)
• Less than 100 mV insertion loss @ 5 A
• Maximum amperage detection 2 A
• PreCheck lighting circuits up to 1 A
• Amperage resolution 2 mA
ABS Fault CodeCheck™ *
Retrieved ABS data includes:
• Fault lamp status
• DTC trouble-codes (active & stored)
• ABS Odometer
• VIN (if programmed into ABS)
*Compatible with most ABS manufacturers
PreCheck™
Schedule-based or remote on-demand
• Lamp circuit supply: 11.5 V
DC
/ 1 A
• External sensor supply: 12 V
DC
/ 500 mA